|
Home |
OneWrench |
Prylift |
Contact Us |
|
|
|
|
|
 |
|
|
Creating, Testing, and Bringing New Ideas
for Consumer Benefit. |
|
|
|
|
|
|
|
OneWrench was designed by a farmer in Central
Illinois to ease the task of adjusting the seeding depth of JD 750
& 1850 grain drills. He built the first one
for use on his own drill. It worked
so well he decided to offer the new tool to other farmers.
Now you too can take advantage of the new OneWrench by ProvIdeas LLC. |
|
|
OneWrench is very simple to use and it takes only a few
minutes to become skilled in its use. |
|
Holding OneWrench with its handle angled away from the JD
adjusting plate; insert the OneWrench point into the ½” square hole in the JD
adjusting plate. This is the same
square hole used by the OEM tool that came with your drill. |
|
With the point now inserted into the square hole, move the
OneWrench handle towards the plate into the operating position.
This action will force the JD locking pin out of the adjusting plate
slot. |
|
John Deere 750 & 1850 Drill OEM Depth tool in use : |
|
|
|
While OneWrench is held in the operating position, its pad
fills all the slots in the JD adjusting plate and keeps them filled.
This allows the plate to rotate freely past as many slots as you want.
It can adjust the plate from one slot at a time up to the full range of
the JD plate in one motion.
|
|
When your desired depth setting is reached, you move the
handle away from the JD plate to open the slots and allow the locking pin to
snap into place. If the locking pin
is between two adjusting plate slots, you can rotate the plate with OneWrench
while the slots remain open so the locking pin will snap into place as you
rotate the adjusting plate. |
|
OneWrench can adjust an entire 750 & 1850
grain drill in less than 3 ½ minutes.
Using the tool originally shipped with the JD 750 & 1850 drills, it usually
takes closer to 15 minutes. |
|
OneWrench detail of lock pin : |
|
|
|
UOI estimates your time has a value of $500 an hour during
planting. Based on this, OneWrench
will pay for itself the first time you use it in the field. |
|
The ease and speed of using OneWrench will
encourage you to keep the drill adjusted
more often and more precisely.
This can increase your income by either save you seed by allowing you to
reduce rates and still get the same stand,
or by leaving the seeding rate the same and
achieving a thicker stand. |
|
OneWrench will save you the stress and frustration of the
cumbersome OEM way of adjusting the depth making your
drilling more pleasant. |
|
OneWrench in Use : |
|
|
For more information please
contact us and
we will be happy to get back with you. |